![]() Ip address outside 1.1.1.2 255.255.255.224Īn access lists must be configured to define the IPSec policies. The default gateway is configured as 1.1.1.2 via the outside interface. The inside interface has a static private IP address that faces the internal private network. The outside interface has a static public IP address of 1.1.1.2 which faces the internet. For more information, please consult your Cisco product documentation. This example assumes you have knowledge of the Cisco PIX gateway command line configuration interface. ![]() The client uses the pull configuration method to acquire the following parameters automatically from the gateway. ![]() The configuration example described below will allow an IPsec VPN client to communicate with a single remote private network. The Shrew Soft VPN Client has been tested with Cisco products to ensure interoperability. If you have a PIX device running firmware version 7.x, please consult the HowtoCiscoAsa. This guide provides information that can be used to configure a Cisco PIX device running firmware version 6.x to support IPsec VPN client connectivity.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |